Adjustable Steel Beam Clamp
Designed to be used in the suspension of a hanger rod from an I-Beam. The clamp is adjustable from 31⁄2” (88.9) to 8” (203.2) and can be used with flange thicknesses up to 1/2” (12.7).
Material: Carbon Steel (Type 304 or 316 Stainless Steel upon request)
Finish: Plain, Zinc Electro-Galvanized (Hot dipped galvanized with electro-galvanized hardware upon request)
Approvals: Complies with Federal Specification A-A-1192A (Type 27) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 27) which supersedes ANSI/MSS SP-69.
Designed to be used in the suspension of a hanger rod from an I-Beam. The clamp is adjustable from 31⁄2” (88.9) to 8” (203.2) and can be used with flange thicknesses up to 1/2” (12.7).
Material: Carbon Steel (Type 304 or 316 Stainless Steel upon request)
Finish: Plain, Zinc Electro-Galvanized (Hot dipped galvanized with electro-galvanized hardware upon request)
Approvals: Complies with Federal Specification A-A-1192A (Type 27) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 27) which supersedes ANSI/MSS SP-69.
Designed to be used in the suspension of a hanger rod from an I-Beam. The clamp is adjustable from 31⁄2” (88.9) to 8” (203.2) and can be used with flange thicknesses up to 1/2” (12.7).
Material: Carbon Steel (Type 304 or 316 Stainless Steel upon request)
Finish: Plain, Zinc Electro-Galvanized (Hot dipped galvanized with electro-galvanized hardware upon request)
Approvals: Complies with Federal Specification A-A-1192A (Type 27) and Manufacturers’ Standardization Society ANSI/MSS SP-58 (Type 27) which supersedes ANSI/MSS SP-69.